Power Packages for Performance Vehicles in NC

Prices may vary depending on existing equipment and configurations.
Note: Packages are rated as horsepower and torque at the crankshaft. These are based on increases over OEM ratings using chassis dyno data and estimated driveline efficiency.

Scroll down for example packages and hit the button to reach out with any questions you may have. We can configure any sort of custom package to suit your goals.

GM Power Packages

2016+ Camaro ZL1 and Z06 Corvette

* 2019+ auto transmission recalibration requires transmission controller unlock

Stage 1 | 725hp

  • 9.25” DSX Tuning LSA/LT4 lower pulley
  • Roto-Fab Big Gulp 5.00″ cold-air intake system
  • ATI Super Damper Supercharged Series Harmonic Balancer
  • ARP Balancer Bolts
  • Mighty Mouse oil catch can kit
  • Lingenfelter 160* Thermostat
  • NGK spark plugs LTR7IX-11
  • Gates Serpentine Belts
  • DEI Titanium Protect-A-Boots
  • DEI Heat Sleeve
  • HP Tuners Tuning Credits
  • Custom Engine and Transmission recalibration using our Dynojet 224xlc dyno.

Stage 2 | 750hp

  • 9.25” DSX Tuning LSA/LT4 lower pulley
  • Roto-Fab Big Gulp 5.00″ cold-air intake system
  • ATI Super Damper Supercharged Series Harmonic Balancer
  • ARP Balancer Bolts
  • Stainless Works 1-7/8th long tube header kit w/ high-flow
  • Mighty Mouse oil catch can kit
  • Lingenfelter 160* Thermostat
  • NGK spark plugs LTR7IX-11
  • Gates Serpentine Belts
  • DEI Titanium Protect-A-Boots
  • DEI Heat Sleeve
  • HP Tuners Tuning Credits
  • Custom Engine and Transmission recalibration using our Dynojet 224xlc dyno.

Stage 3 | 800hp

  • 2.50″ 10 Rib ZPE GripTec® 2pc MKII LT4 pulley & hub kit
  • 9.45” DSX Tuning LSA/LT4 lower pulley
  • Roto-Fab Big Gulp 5.00″ cold-air intake system
  • Kong Performance Kong Performance ported supercharger & inlet port matched to 103mm throttle body
  • Afco 2017-2021 ZL1 Camaro Heat Exchanger Kit
  • Nick Williams 103MM DBW Throttle Body
  • ATI Super Damper Supercharged Series Harmonic Balancer
  • ARP Balancer Bolts
  • DSX Tuning auxiliary fuel pump kit
  • Cordes Performance Racing gen6 zl1/v3 engine bay expansion tank
  • Stainless Works 1-7/8th long tube header kit w/ high-flow
  • Mighty Mouse oil catch can kit
  • Lingenfelter 160* Thermostat
  • NGK spark plugs LTR7IX-11
  • Gates Serpentine Belts
  • DEI Titanium Protect-A-Boots
  • DEI Heat Sleeve
  • HP Tuners Tuning Credits
  • Custom Engine and Transmission recalibration using our Dynojet 224xlc dyno.

2016+ Camaro SS and 2016 Corvette

Naturally Aspirated
*2019+ auto transmission recalibration requires transmission controller unlock

Stage 2 | 500hp

  • Roto-Fab Big Gulp 5.00″ cold-air intake system
  • Stainless Works 1-7/8th long tube header kit w/ high-flow catalytic converters
  • NGK spark plugs TR6IX-11
  • DEI Titanium Protect-A-Boots
  • DEI Heat Sleeve
  • HP Tuners Tuning Credits
  • Custom Engine and Transmission recalibration using our Dynojet 224xlc dyno.

Stage 3 | 600 hp

  • Roto-Fab Big Gulp 5.00″ cold-air intake system
  • Stainless Works 1-7/8th long tube header kit w/ high-flow catalytic converters
  • Nick Williams 103mm throttle body
  • Ported MSD Atomic Airforce intake manifold
  • BTR camshaft with 38% fuel lobe
  • Valve train upgrade kit, including valve springs/retainers, hardened chromoly pushrods, phaser lock-out
  • GM LS7 lifters
  • Trunion bearing upgrade
  • NGK spark plugs TR6IX-11
  • DEI Titanium Protect-A-Boots
  • DEI Heat Sleeve
  • HP Tuners Tuning Credits
  • Custom Engine and Transmission recalibration using our Dynojet 224xlc dyno.

Stage 4 | 650 hp | Supercharged

  • Whipple Gen 5 3.0L Supercharger Intercooled Kit
  • Mighty Mouse oil catch can kit
  • Lingenfelter 160* Thermostat
  • NGK LTR7IX-11
  • Gates Serpentine Belts
  • DEI Titanium Protect-A-Boots
  • DEI Heat Sleeve
  • HP Tuners Tuning Credits
  • Custom Engine and Transmission recalibration using our Dynojet 224xlc dyno.

Mopar Power Packages

* 2018+ require PCM unlock and Smart Cable

2015-2023 Hellcat – Charger | Challenger | TrackHawk | Durango | TRX

Stage 1 | 850+ hp

  • 2.85″ GripTec S/C pulley and hub kit
  • ID1050X injectors
  • NGK Spark Plugs LFR7AIX 2309
  • JLT cold air intake, JLT Oil Separator
  • Gates Fleetrunner drive belt
  • 180F thermostat
  • *PCM Unlock and Smart Access Cable
  • OEM Coolant Gaskets
  • Installation
  • HP Tuners Credits
  • Custom Engine and Transmission recalibration using our Dynojet 224xlc dyno.

Stage 2 900+hp

  • 2.85″ GripTec S/C pulley and hub kit
  • ID1050X injectors, NGK Spark Plug LFR7AIX 2309
  • JLT cold air intake, JLT Oil Separator
  • Gates Fleetrunner drive belt,
  • 180F thermostat
  • 108mm Throttle Body
  • Ported supercharger and port matched inlet
  • Stainless Works headers w/ catalytic converters and X-pipe
  • *PCM Unlock and Smart Access Cable
  • Coolant, Gaskets, Installation labor
  • HP Tuners Credits
  • Custom Engine and Transmission recalibration using our Dynojet 224xlc dyno.

Reviews and Testimonials

Scroll to Top